Keysight, KD Partner to Enhance Multigigabit Automotive Ethernet Testing

SANTA ROSA, CA, Jan 29, 2025 – Keysight Technologies and KD, Inc., have collaborated to create a comprehensive test for multigigabit optical automotive Ethernet physical layer. The companies have jointly developed a Transmitter Distortion Figure of Merit (TDFOM) measurement and signal analysis metric validating PMD transmitter conformance based on the IEEE 802.3cz and Open Alliance.

Image Source: KD, Inc.

Modern day vehicles contain over 100 million lines of code, pushing the limits of their hardware capabilities to support an unprecedented combination of infotainment systems, advanced driver-assistance systems (ADAS), and computing power. Future vehicle computing systems are shifting toward centralized designs, with software-driven functions and increased data sharing across fewer engine control units (ECUs). Thus, backbone communications links push to ever-higher speeds in the multi-gigabits-per-second range.

In response, the industry has created new automotive Ethernet standards, with IEEE 802.3cz being the highest data rate multi-gigabit standard. Published in 2023, the standard supports operations up to 50 Gb/s over glass optical fiber, specifying physical-layer requirements and management parameters for 2.5-, 5-, 10-, 25-, and 50-Gb/s operations in automotive environments. The standard is designed to meet the demands of modern in-vehicle networking platforms.

The newly developed TDFOM measurement and signal analysis metric represents a significant advancement in evaluating multigigabit optical signal quality in glass optical fiber transmission. As specified in IEEE 802.3cz, TDFOM measurements utilize a reference receiver that models typical integrated circuit (IC) implementation, ensuring transmitter interoperability through signal integrity validation. This metric is essential for calibrating reference transmitters and enabling compliance testing of optical receivers.

Combining KD’s software-based reference receiver and signal metric analysis capabilities with Keysight’s optical-to-electrical converter (O/E) and oscilloscope technology delivers a comprehensive testing platform that evaluates a transmitted optical signal’s ability to achieve the required system Bit Error Rate (BER) after passing through a worst-case optical channel and a reference receiver. This development emerged from both companies’ active participation in establishing the final TDFOM specification during the IEEE 802.3cz standard development.

Rubén Pérez-Aranda, KD’s CTO and co-founder, said, “With this agreement, we make a big step in providing OEMs and Tier-1 companies with the necessary means to test the quality of developments incorporating optical communications according to the IEEE Std 802.3cz. Keysight and KD have collaborated in IEEE 802.3 to define the tests and metrics that ensure the new Ethernet communications standard meets the quality requirements demanded by the automotive industry.”

Thomas Goetzel, vice president and general manager of Keysight’s automotive & energy solution, highlighted the importance of this agreement: “Automotive Ethernet technologies have evolved and now derive significant benefits from optical fiber technologies for enabling multigigabit in-vehicle networking. Our innovative test and measurement equipment, combined with KD’s expertise in optical measurements, aims to assist customers in exploring reliable high-speed links in in-vehicle networking.”

This collaboration combines KD’s skills in developing new technologies with Keysight’s testing tools. It helps OEMs and Tier-1 suppliers test and improve advanced technologies. The partnership supports innovation, improves compatibility, and promotes the use of advanced optical communication standards in the automotive industry.

About Keysight Technologies

Keysight Technologies, established in 2014 as a spin-off from Agilent Technologies, is a leading provider of electronic design and test solutions. Headquartered in Santa Rosa, CA, the company offers a portfolio of hardware and software products, including oscilloscopes, signal generators, and electronic design automation (EDA) software. The solutions serve industries, such as telecommunications, aerospace and defense, automotive, energy, semiconductor, and general electronics. As of 2024, Keysight employs approximately 15,500 people and reported annual revenue of $5.0 billion. The company’s global presence spans the Americas, Europe, and Asia Pacific, supporting over 30,000 customers in more than 100 countries. Keysight is known for driving innovation, with over 3,800 patents and a focus on research and development.

About KD Inc.

KD, Inc. is a fabless semiconductor company headquartered in Tres Cantos, Madrid, Spain. Established in 2010, it specializes in high-speed optical networking solutions, particularly for harsh environments. The company provides semiconductors designed to enable optical communication over fiber optics, offering products for automotive, industrial, and consumer applications. Their technology supports multi-gigabit speeds, making it ideal for automotive Ethernet, industrial data networks, and consumer devices such as Wi-Fi access points. KD Inc. has made advancements in optical communication, developing solutions that ensure performance in environments requiring high-speed and reliable data transmission. The company’s innovative solutions are integral to the evolving need for fast and efficient data transfer in various industries. The company plays a crucial role in advancing fiber optic technology for next-gen automotive and industrial applications.

Source: Keysight

Baya Systems Welcomes Manish Muthal and Siva Yerramilli to Board of Directors

SANTA CLARA, CA, Jan 29, 2025 – Baya Systems has announced the additions of Manish Muthal and Siva Yerramilli to its Board of Directors. Both bring extensive experience in semiconductor technology and software and scaling disruptive startups, further strengthening Baya Systems’ leadership team.

They join chairman Jim Keller, Baya Systems CEO Dr. Sailesh Kumar and Matrix Capital General Partner Stan Reiss on the board.

Manish Muthal. Image: LinkedIn

Manish Muthal, senior managing director at Maverick Silicon, is a seasoned semiconductor industry veteran with leadership roles at Intel, LSI, Xilinx and Broadcom, as well as a track record of founding successful venture-backed startups.

“At Maverick Silicon, we believe Baya Systems’ technology will be the key enabler of next-generation data movement, communication and multi-die systems that will power AI acceleration, scalable infrastructure and mobility,” said Muthal. “I’m excited to join a team of this caliber that is enabling the paradigm shift for explosive growth of intelligent compute systems.”

Also joining the board is Siva Yerramilli, SVP of the Corporate Incubation Group at Synopsys, Inc., that delivers trusted and comprehensive silicon to systems design solutions, from electronic design automation to silicon IP and system verification and validation. Prior to this, he had a very successful career at Intel, leading technology enablement and product development.

“Having followed the founding team building NetSpeed Systems and their contribution to the Xeon program during my time at Intel, I see the generational leap they have made with Baya Systems. I look forward to being part of this journey,” said Yerramilli. “Baya’s focus on software-driven architecture analysis and development and their expertise in highly accurate performance modeling are fundamental to the next generation of system design that translates target software workloads rapidly into customized and future-proofed designs.”

“Manish and Siva bring great experience that complements our team,” said Keller. “We’re thrilled to welcome them to the board. Their guidance and insights will be invaluable to our vision of more capable, intelligent compute.”

About Baya Systems

Baya Systems, headquartered in Santa Clara, CA, specializes in high-performance, software-driven system IP solutions. Founded in 2018, the company focuses on enabling the design, optimization, and deployment of complex, intelligent computing systems. Its flagship products include WeaverPro software and WeaveIP, that provide customizable and scalable transport fabrics for multi-chiplet and system-on-chip (SoC) designs. The solutions cater to industries such as AI acceleration, automotive, IoT, and data centers, delivering high throughput, low latency, and chiplet-readiness. Baya Systems is a key player in optimizing data movement and supporting advanced, data-intensive applications, including autonomous systems, AI processing, and large-scale infrastructure. Baya Systems is gaining recognition for its innovative solutions that reduce the risks and complexities of building next-generation high-performance systems.

Source: Baya Systems

SPX FLOW, Siemens Showcase Digital Twin Tech at MxD

CHARLOTTE, NC, Jan 29, 2025 – SPX FLOW has collaborated with Siemens to highlight cutting-edge digital twin technology at the MxD (Manufacturing x Digital) center in Chicago. A premier hub for innovation in manufacturing, MxD is driving advances across industries such as food and beverage, chemicals, and batteries.

At MxD, SPX FLOW and Siemens are demonstrating the transformative potential of digital twin technology. The technology is enhanced by industrial 5G connectivity and modular production using software-defined module type package (MTP) concepts, showcased through an automated mixing tank with an associated digital twin.

The collaboration combines SPX FLOW’s fluid processing solutions (including mixers, pumps and valves) and expertise with Siemens’ IoT connectivity solutions and computational fluid dynamics (CFD)simulation capabilities to create a digital twin (a precise virtual replica of the physical systems) of an autonomous mixing tank concept. This enables users to design, test, and optimize fluid systems virtually, mitigate risks, improve efficiency and accelerate innovation.

SPX FLOW supports Siemens in showcasing how virtual simulation can transform production. By creating a digital twin of a flexible, autonomous process, manufacturers can improve production, verify throughput, and adapt easily than with traditional fixed production lines. This method also enables continuous mixing of materials or ingredients while an autonomous mobile robot (AMR) navigates the plant, ensuring maximum production capacity and consistent quality.

Image: A Guide to Fluid Mixing, J.Y. Oldshue, et al.

“Our innovative fluid technologies combined with simulation-based digital twins and AI-driven modeling enables us to deliver faster, customer-focused solutions,” said Tyrone Jeffers, SPX FLOW vice president of global manufacturing and supply chain. “Together with Siemens, we are prioritizing flexibility, efficiency, and sustainability, paving the way for a new era of manufacturing excellence.”

CFD modeling and IoT conditional monitoring support SPX FLOW’s product development by:

  • Accelerating Innovation: Reducing modeling time while improving precision.
  • Improving Efficiency: Refining designs with enhanced flow analysis.
  • Integrating Seamlessly: Aligning digital twins with real-world applications.
  • Smart Products: Leveraging IoT conditional monitoring to optimize equipment performance and enable predictive maintenance.

“This collaboration is a win for us and a huge win for our industrial customers,” said Del Costy, managing director, Americas, Siemens Digital Industries Software. “Working together with SPX FLOW and harnessing the power of live connections between the physical and digital worlds in digital twin models, we are helping customers to achieve faster time to market, optimize system performance, reduce costs and resource usage, and deliver tailored, application-specific solutions to meet their unique needs.”

About SPX FLOW, Inc. 

SPX FLOW, Inc., headquartered in Charlotte, NC, is a leading provider of process solutions for nutrition, health, and industrial markets. The company was established in 2015. It specializes in engineering, designing, and manufacturing a wide range of products, including pumps, valves, mixers, filters, air dryers, homogenizers, hydraulic tools, separators, and heat exchangers. These solutions serve industries such as food and beverage, power and energy, chemical processing, compressed air, mining, and other industrial sectors. Operating in more than 25 countries with a workforce of approximately 3,900 employees, SPX FLOW has a global presence and serves customers in over 140 countries. The company is recognized for its innovative and sustainable solutions that improve the world through advanced process technologies.

About Siemens Digital Industries Software

Siemens Digital Industries Software provides comprehensive solutions for digital transformation, offering software and services that enable companies to improve product design, manufacturing, and operational processes. It serves a wide range of industries including automotive, aerospace, industrial machinery, electronics, and consumer products. Siemens Digital Industries Software has contributed towards innovation in manufacturing and product lifecycle management (PLM). The company is headquartered in Plano, TX, and is part of Siemens AG.

Source: SPX FLOW

InOrbit Unveils Space Intelligence to Connect Robotics and Enterprise

InOrbit unveils Space Intelligence, an AI-driven platform optimizing warehouse and manufacturing operations for smarter, more efficient workflows.
InOrbit unveils Space Intelligence, an AI-driven platform optimizing warehouse and manufacturing operations for smarter, more efficient workflows.

MOUNTAIN VIEW, CA, Jan 29, 2025 – Launched by InOrbit.AI, Space Intelligence is a product suite that acts as the central nervous system for smart operations. By integrating autonomous robots, line-of-business data and spatial computing, Space Intelligence leverages physical AI to unlock a new level of performance and flexibility in warehouses, manufacturing facilities, and other demanding environments to drive smarter operations.

“Traditional automation offers rigid and static operations,” said Florian Pestoni, CEO of InOrbit. “InOrbit Space Intelligence enables enterprises to leap forward with software-defined orchestration and leverage the latest development in Physical and AI and Reinforcement Learning to drive dynamic process optimization. Now enterprise customers can drive productivity and improve operational resilience.”

Space Intelligence combines business, robotic, and spatial data to streamline real-world operations. It offers flexibility and clear insights, supporting ongoing improvements and achieving balance.

InOrbit Space Intelligence offers enterprises:

  • Unified Command: Seamlessly connecting enterprise systems (WMS, ERP, WES) with robot operations for complete process visibility and control.
  • Intelligent Orchestration: Mapping and managing autonomous robots, IoT devices, and non-robotic equipment for synchronized and optimized facility operations.
  • Proactive Operations: Real-time traffic management, path planning and incident response to execute business workflows and improve utilization.
  • AI-Powered Optimization: Continuously learning and adapting, dynamically optimizing operations for peak efficiency and improved ROI.

“We are excited to introduce Space Intelligence to enterprises,” continued Pestoni. “This transformative technology enables businesses to truly unlock the full potential of a facility with smart operations.”

About InOrbit.AI

InOrbit, headquartered in Mountain View, CA, specializes in cloud-based robot operations (RobOps) management. Founded in 2017, the company offers an AI-powered platform that helps enterprises and robot developers optimize autonomous robot fleets at scale. Serving industries like logistics, manufacturing, and smart cities, InOrbit streamlines deployment, monitoring, and optimization of robotic systems. Its platform enables seamless integration across multi-vendor fleets, improving efficiency and reliability.

Source: InOrbit

Siemens USA Strengthens Government Affairs Team with New Hires

Siemens USA has strengthened its Government Affairs (GA) organization with the addition of strategic hires and promotions to enhance the company’s policy expertise and align advocacy efforts with Siemens’ business priorities across infrastructure, transportation, manufacturing, workforce and technology.

“We are thrilled to deepen our bench of seasoned policy and political experts to advance our business priorities in Washington D.C. and nationally,” said Brie N. Sachse, senior vice president & head of government affairs for Siemens USA. “These dynamic government relations professionals bring a policy lens to the opportunities where Siemens technologies and services can help address our nation’s most significant challenges.”

Recently Promoted Strategic Leaders & New Additions:

  • Drew Wayne is now managing director for digital, tax and trade policy on the federal affairs team. Drew joined Siemens in 2020 to manage the tax and trade portfolio. He continues this role while expanding the team’s focus on policies impacting advanced manufacturing, including research, incentives, AI, and cybersecurity. Drew spent ten years on Capitol Hill covering a range of policy issues, including the establishment of the Manufacturing USA program, advancing the Tax Cuts & Jobs Act and serving as Chief of Staff.
  • Ryan Dalton is now managing director for state & local government affairs. Ryan joined Siemens in 2021 focused on policy and external affairs in the Northeast and managing the company’s transportation policy priorities at the federal level. Prior to Siemens, Ryan spent nearly fifteen years serving three different New York governors in both Albany, NY, and Washington, DC. Additionally, Ryan served as a senior member of the BGR Group, where he advised clients on strategic communications, legislative advocacy, and regulatory compliance.
  • Julie Herbert joins as senior manager for transportation policy. Julie has extensive experience in automotive and transportation policy. She most recently worked at Hyundai Motor Company. Prior to that, she held roles in policy and client development at Sidley Austin LLP and AARP.
  • Meredith Beeson joins as director for the state & local government affairs team. Meredith has background in policy work focused on inbound companies. Before joining Siemens, she led state policy advocacy for the Global Business Alliance (GBA), a trade association supporting multinational companies in the U.S. Prior to GBA, she worked on the state policy team at Target.
  • John Pappas joins as the director of climate and infrastructure policy. John brings experience in clean energy policy and advocacy from his previous roles, including Energy Policy Counsel for U.S. Representative Kathy Castor (D-FL) and Government Affairs Director at Monument Advocacy where he represented clients in clean hydrogen, low-carbon cement, and other clean tech sectors.
  • Pooja Patel joins as manager, digital policy and will cover the emerging technology landscape including AI, cyber security and data privacy. Previously, Pooja gained experience at multiclient firms Signal Group and Brumidi Group in developing effective advocacy strategies.
  • Patrick McGarry, Jr., joins as state & local policy & legislative analyst. Previously, Patrick was at Stateside Associates, a state and local public policy advocacy firm, part of the policy team for U.S. Senator Cory Gardner (R-CO). Patrick’s addition to the team reflects the growing level of activity within the state and local governments impacting Siemens businesses.
  • Roosevelt Holmes joins as director of partnerships & coalitions where he brings extensive experience in coalition-building and public affairs. Before assuming this role, Roosevelt held several positions in the Biden-Harris Administration most recently as chief of staff at the U.S. Department of Commerce’s Minority Business Development Agency. Roosevelt also spent time in the Florida Senate, the Office of U. S. Representative Kathy Castor, the U.S. House Committee on Education and the Workforce under Congressman Bobby Scott, and the United Negro College Fund.
  • Barbara Kadash re-joins Siemens as government affairs manager, political programming & operations lead providing support for teamwide organization projects, overseeing administrative functions and leading compliance and regulatory requirements for the company’s Political Action Committee as well as lobbying disclosures. Most recently, Barbara was a business coordinator and operations professional for General Motors. Prior to that, Barbara served in administrative roles for various Siemens entities.

The new additions round out a strong slate of policy experts including Drew Colliatie, who serves as director for digital policy, focused on industrial markets, and Edward Adutwum, federal policy & legislative analyst. This team will continue to serve as policy champions, positioning the company with external stakeholders to advance Siemens U.S. legislative agenda.

About Siemens Corp.

Siemens Corporation, the U.S. subsidiary of Siemens AG, is a leading technology company focusing on industry, infrastructure, transport, and healthcare sectors. Established in 1847, Siemens has been in operation for over 175 years. Globally, Siemens AG reported revenues of approximately €78 billion in fiscal that ended on September 30, 2023. The Siemens Group USA generated revenue of approximately $20 billion and employs approximately 45,000 people serving customers in all 50 states and Puerto Rico. The company is headquartered in Munich, Germany, with its U.S. operations is based in Washington, D.C.

Source: Siemens

IDC MarketScape Names Siemens Leader in Manufacturing Execution Systems

PLANO, TX, Jan 28, 2025 – Siemens Digital Industries Software announced that it has been named a leader in the IDC MarketScape: Worldwide Manufacturing Execution Systems (MES) 2024–20251 vendor assessment. The IDC MarketScape report evaluates software providers in the MES market serving the manufacturing industry.

“The recognition of Siemens as a manufacturing execution system leader in the IDC MarketScape report, we believe, highlights our fast pace of innovation to provide our customers with world-class integrated manufacturing execution systems technology,” said Tobias Lange, senior vice president manufacturing operations management, digital manufacturing, Siemens Digital Industries Software. “Our continued commitment to delivering open, configurable, easily deployable and inherently scalable software is truly benefitting customers across the globe.”

Siemens’ Opcenter at a glance

Opcenter is Siemens’ software for MES, and with support for multi-plant architectures, it reduces the burden on regional IT teams and helps to lower overall Total Cost of Ownership (TCO). It seamlessly integrates with solutions from the Siemens Xcelerator portfolio of industrial software, including Teamcenter software for Product Lifecycle Management, Simcenter software for simulation, Insights Hub for data analytics, AX4 and Supply Chain Suite, and Tecnomatix software for factory simulation to bring new levels of agility and productivity to the shop floor.

To address the growing complexity of product and process management, disruptive technologies, supply chain volatility, and tightening margins, Siemens has introduced Opcenter X to empower small and medium businesses to embark on a progressive digital transformation journey through cloud technologies and accessing as software as a service (SaaS), which lowers the time and cost barriers for organizations to adopt MOM capabilities.

“The need for shop floor processes to coordinate with rapidly evolving value chains requires that MES work seamlessly with other enterprise and manufacturing-focused applications to ensure visibility from the shop floor to the top floor,” said Lorenzo Veronesi, associate research sirector, IDC manufacturing insights. “Innovation drivers such as cloud computing, edge analytics, the Industrial Internet of Things (IIoT), and artificial intelligence (AI), is significantly influencing the development of MES.”

About IDC MarketScape

IDC MarketScape is a vendor assessment tool in the information and communications technology (ICT) industry, It serves industries such as information technology, telecommunications, and consumer technology. It evaluates products, services, strategies, and potential for market success. This tool helps technology buyers with a 360-degree assessment of the strengths and weaknesses of both current and potential vendors. Established in 1964, IDC is headquartered in Needham, MA.

About Siemens Digital Industries Software

Siemens Digital Industries Software provides comprehensive solutions for digital transformation, offering software and services that enable companies to improve product design, manufacturing, and operational processes. It serves a wide range of industries including automotive, aerospace, industrial machinery, electronics, and consumer products. Siemens Digital Industries Software has contributed towards innovation in manufacturing and product lifecycle management (PLM). The company is headquartered in Plano, TX, and is part of Siemens AG.

1 IDC MarketScape: Worldwide Manufacturing Execution Systems 2024–2025 Vendor Assessment (doc # US51813624, December 2024)

Source: Siemens

CBM Sets 2025 Agenda to Help Manufacturing Overcome Challenges

A trade body representing 200 manufacturers has placed a Minister for Manufacturing, greater SME involvement in the Industrial Strategy, and ongoing lobbying around the Carbon Border Adjustment Mechanism (CBAM) at the top of its action list for 2025.

Steve Morley and Geraldine Bolton. Photo: CBM

Steve Morley and Geraldine Bolton of the Confederation of British Metalforming (CBM) are unified in their desire to give their members an even greater voice on key issues impacting their ability to compete over the next twelve months, vowing to enhance their own organization’s offer even further.

Despite the challenges of recent tax increases in the budget and ongoing geopolitical uncertainty of US tariffs and global conflict, the duo believes there are still plenty of opportunities for manufacturers if there is more stability in the automotive sector and if the ongoing resurgence in aerospace continues. They also believe that serious government backing and funding towards ‘Made in Britain’ could dispel some of the economic gloom and generate numerous possibilities.

“It’s a positive that we’ve got an industrial strategy after so long and that we and other trade bodies have been given the chance to have our say,” added Steve, who is president of the CBM.

“We do have concerns, however. The make-up of the ‘IS’ council has no SME representation and that doesn’t bode well for getting our voice across. I also have a big worry that many of the big decisions will be made early thus taking up any investment opportunities for small to medium-sized firms.”

He continued: “There will be a major piece of lobbying to do around CBAM and there’s an ongoing discussion to be had about skills, energy costs and how we can reshore more work.”

“Another major issue for our members is HMRC back duty claims on steel safeguarding and, through our relationship with West Bromwich MP Sarah Coombes, we now have this back on the table with the hope of a successful outcome for manufacturers unfairly punished.”

Geraldine Bolton, CEO of the CBM, continued, “We are currently in the process of working up a new six-year climate change agreement taking us to 2033, with a new base line year and new targets.”

“There is a chance to include new eligible processes in these agreements and our experts are working on this at the moment, The Government is tightening up on the energy reporting that firms have to do with annual reports now being required for both CC agreements and ESOS.”

2025 is going to be a busy year, with the CBM attending EIFI in Seville, Euro forge in France and the UK, and ICOSPA in Tokyo—all-important trade events that help it stay on top of the latest international developments.

There will also be an opportunity to build on the new CBM Corporate Membership, with JLR and the advanced forming research center already signed-up. A third big name from the financial services sector should be announced shortly.

Geraldine concluded, “Like our manufacturers, we must keep improving in all areas – there’s no room to stand still or be complacent. The use of AI is something we will embrace so we can improve our analytics and improve our documentation and content.”

About Confederation of British Metalforming (CBM)

The Confederation of British Metalforming (CBM), established in 1998, is the UK’s leading trade association for manufacturers of fasteners, forgings, pressings, cold-rolled, and sheet-metal products. Headquartered at the National Metalforming Centre in West Bromwich, West Midlands, CBM represents members who supply components and structures to global OEMs across sectors such as aerospace, automotive, construction, defense, engineering, nuclear, offshore, and consumer goods. The organization offers services including lobbying and promotion, business opportunity identification, and knowledge sharing through events and partnerships. It currently provides lobbying services to more than 200 members across the country, as well as providing access to specialist technical experts in metals, forgings and fasteners. CBM’s initiatives aim to raise the profile of metalforming, provide a collective voice in legislative processes, and facilitate innovation by connecting members with research centers like the Advanced Forming Research Centre. Each year, CBM companies also save £4m by having their Climate Change (CC) Levy administration completed on their behalf, with firms urged to register before May 1st to be eligible for support for next year’s claim.

DMP and PTV Sign MoU to Advance Traffic Simulation Tech

TOKYO, Japan, Jan 28, 2025 – Dynamic Map Platform Co., Ltd. has signed a Memorandum of Understanding (MoU) with PTV Group, part of Umovity, for the development of simulation technology in the fields of automotive and transportation engineering and its applications.

(left) PTV Group Managing Director Mobility Steve Perone (Right) Shuichi Yoshimura, CEO & President

Under the MoU, DMP and PTV have agreed to combine DMP’s high-precision 3D map data with PTV’s traffic simulation software “PTV Vissim” to provide a high-tech simulation environment. Through this collaboration, DMP aims to further utilize 3D Map data in simulations, while PTV aims to expand the adoption of “PTV Vissim” mainly in the automotive industry.

Commenting on the partnership, Steve Perone, PTV’s managing director mobility, said, “Precise data is essential for creating realistic simulations. DMP’s high-precision 3D map data will allow us to deliver Model2Go for PTV Vissim networks – out of the box and in just a few days, unlocking a wealth of opportunities for both the automotive industry and traffic engineering.”

Shuichi Yoshimura, DMP’s president and CEO, stated, “PTV is a global provider of simulation software. By providing 3D maps to PTV and PTV users around the world, it is possible to replicate a road network that is as close to reality as possible on a global scale. Through this partnership, we look forward to significant innovation in the automotive and transportation industries.”

As a platform provider of high-precision 3D map data, DMP will continue to collaborate with a wide range of industries and contribute to the creation of innovations in various industrial fields.

About PTV Group

PTV Group, founded in 1979 and based in Karlsruhe, Germany, is a leader in software solutions for traffic planning, simulation, and real-time management. Serving industries like automotive, government agencies, and transportation, the company focuses on advancing smart, efficient, and sustainable mobility solutions. In 2023, PTV Group’s Mobility division merged with Econolite under the Umovity brand, further strengthening its market presence. With over four decades of expertise, PTV’s proprietary algorithms support microscopic and macroscopic traffic modeling, benefitting more than 2,900 cities and municipalities worldwide. The company employs approximately 670 people globally. In January 2022, Bridgepoint acquired a majority stake in PTV Group, partnering with shareholder Porsche Automobil Holding SE to drive further expansion. PTV’s innovative traffic management solutions continue to shape urban mobility by optimizing transportation networks and enabling smarter infrastructure planning.

About Dynamic Map Platform Co., Ltd.

Dynamic Map Platform Co., Ltd., established on June 13, 2016, and headquartered in Tokyo, Japan, specializes in developing high-precision 3D map data essential for autonomous driving and advanced driver assistance systems. Serving the automotive industry, the company provides dynamic mapping solutions that enhance vehicle navigation and safety. As of September 1, 2023, Dynamic Map Platform employs approximately 270 individuals across its operations in Japan, the U.S., Germany, and South Korea.

Source: Dynamic Map Platform

MZ Tech Launches GENIO EVO for 3D-IC Thermal, Stress Analysis

ROME, Italy, Jan 28, 2025 – MZ Technologies unveiled GENIO EVO, the first integrated chiplet/package EDA tool to address in pre-layout stage the two major issues of 3D-IC design, thermal and mechanical stress.

GENIO EVO is the second generation of GENIO, which was the EDA’s first successful integrated chiplet/package co-design tool. GENIO, MZ’s flagship product, is a cross-fabric platform for system design providing chiplet/die, silicon interposer, package, and surrounding PCB co-design features that achieve area, power, and performance targets. The tool works with any technology and connects easily using standard formats. It supports commercial implementation platforms or custom EDA workflows through dedicated plug-ins.

Like the original, GENIO EVO fits into any existing design flow and operates at the architecture level, pathfinding the optimal system choices to implement a 2.5D or 3D multi-die design.

A new user interface fronts a cross-hierarchical, 3D-aware design methodology that streamlines the entire system design process. IC and advanced packaging design are integrated to ensure full system level optimization, with a shorter design cycle, faster time-to-manufacturing, and improved yields.

GENIO EVO identifies and analyzes thermal and mechanical failures. It supports early design decisions by enabling architectural exploration and “what-if” scenarios. This helps improve accuracy during implementation process. It anticipates and avoids future thermal and mechanical problems by planning and managing high pin count connections in complex multi-fabric system design.

Aside from its design capabilities, GENIO EVO improves cross-team communications because components of any nature can be imported from different design environments.

“MZ Technologies was the first EDA company to deliver a commercially available co-design tool three years ago and now GENIO EVO is first tool to successfully anticipate and fix mechanical and thermal failures prior to design iteration,” said Anna Fontanelli, founder and CEO of MZ Technologies.

About MZ Technologies

MZ Technologies, established in 2014 and headquartered in Rome, Italy, is the marketing function of Monozukuri S.p.A., specializing in electronic design automation (EDA) software for complex integrated circuit (IC) systems. The company focuses on overcoming 2.5D and 3D design challenges for next-gen electronic products. Its star product, GENIO, is a cross-fabric platform that streamlines chiplet/die, silicon interposer, package, and PCB co-design, optimizing area, power, and performance. MZ Technologies serves the advanced semiconductor design and manufacturing industry, redefining heterogeneous microelectronic system co-design through enhanced automation in three-dimensional interconnect optimization. With approximately 18 employees, the company delivers innovative methods that improve automation and efficiency in the semiconductor industry. MZ Technologies provides solutions to support building complex multi-die systems, advancing high-performance computing and semiconductor innovations.

SOURCE: Monozukuri Technologies

Molex Launches Compact MMCX PoC to Ensure RF Connections

LISLE, IL, Jan 28, 2025 – Molex announced the availability of its new compact MMCX Power over Coax (PoC) solution, that features a patent-pending mating technique to ensure secure and stable connections while maintaining electrical ground continuity. This product innovation is suited for space-constrained applications where reliable RF connections and continuous power delivery are important, such as automotive liquid-crystal display (LCD) mirrors, driver monitoring systems or industrial sensors.

“Our new MMCX Power over Coax solution includes a full-locking mating mechanism to fix a known weakness in traditional MMCX plug connectors, which can cause signal interruptions and intermittent power levels,” said Roger Kauffman, senior director, RF product management and marketing, Molex. “Over the past year, this solution has performed effectively in different environments, including a light sensor used in a critical industrial security application.”

Backward Compatible, Compact Connectivity

The MMCX Power over Coax (PoC) product not only removes persistent reliability problems, it also is backward compatible with IEC 61169-52 MMCX jack receptacles to facilitate continuous product upgrades. This alleviates the need to redesign existing PCB receptacles, that can save significant time while reducing costs associated with product integration. Meeting both current and future standards provides customers with a reliable solution to meet evolving RF connection and power needs.

The compact product is 30% smaller than traditional MMC connectors, making it ideal for customers seeking to replace larger, heavier MCX connectors as well as more robust and reliable performance. MMCX Power over Coax is advantageous in applications where separate power and data connectors is undesirable. To date, MMCX Power over Coax is being tested and deployed in a variety of agriculture, automotive and industrial automation applications.

This forward-thinking solution boosts performance across a wide range of compact, durable, and dependable products. These include remote and mobile devices, drones, portable electronics, smart-home automation systems, and IoT sensors and infrastructure. MMCX Power over Coax also meets strict reliability standards for GPS antennas, smart transportation systems, wireless meter readers, and more.

About Molex

Molex, established in 1938 and headquartered in Lisle, Illinois, is a global leader in electronic, electrical, and fiber optic connectivity systems. The company offers over 100,000 products, including electrical connectors, optical fiber connectors, and switches, serving industries such as data communications, medical, industrial, automotive, and consumer electronics. Molex pioneered the widely adopted Molex connector in personal computing. As of 2023, Molex reported annual revenues of $3.6 billion and employed approximately 45,000 people worldwide.

Source: Molex

0FansLike
0FollowersFollow
0SubscribersSubscribe
Google search engine

Recent Articles

Trending Now